Katana Unkaï

Click on the magnifying glass to see the zoom

Katana Unkaï

Reference : P04KHJ20

The Unkaï katana is an original creation by Murasame.

Its Shinogui-zukiri style blade is made of 1095/1060 Honsanmai steel.
It benefits from a clay tempering with a Choji style hamon.
The sharpening is razor sharp. The polishing and finishing with azuya stones reveals a very beautiful grain of steel very pleasant to look at.
The fittings are from Japan with a beautifully crafted forged steel tsuba, a fushi-kashira brass set. The menuki are very thin and elegant.
The tsuka is braided with a very beautiful Japanese cotton. The sageo is also from Japan. All the assembly and adjustment part is the work of the Japanese Saber Workshop, our partner.
The saya is made of wood with fully covered in stingray skin with koiguchi-kurikata and koigiri in black buffalo horn.
The Unkaï katana is a magnificent katana, elegant and efficient.

Sugata (Blade Style): Shinogui-zukuri.
Hand forged, curved blade with Nohi and Chu-Kissaki (tip). Real Hamon on the blade made with clay. The hardness of Mune is 50 ° HRC and Ha (blade edge) is 60 ° HRC Rockwell. Cutting blade.

Dimensions:
Nagasa (Blade length from the Tsuba): ~ 73 cm.
Sori (Curvature): about 2cm.
Moto-Kasane (Thickness at the base): about 8 mm.
Saki- Kasane (Tip thickness): about 5 mm.
Saki-Haba (Width at the tip): about 22.2 mm.
Moto-Haba (Width at the base): approximately 31.9 mm.
Balance point (measured from Habaki): ~ 12 cm.
Nakago (tang of the blade) with Mei (inscription) according to tradition
Fuchi-Kashira (Pommeau): Made in japan, beautifully crafted.
Tsuka (Handle): Wood, suitable for silk. Length 26.5 cm
Tsuka-ito (Fabric around handle): premium Japanese cotton fitted.
Samé: Real, white ray skin.
2 Menuki: Brass. One on each side, mounted in the traditional way.
Habaki: Brass
Seppa: Brass
2 Mekugi: Bamboo wood, Assembly according to traditional methods. The 2 mekugi-ana are drilled diagonally and conically in the tang. The mekugi are attached in opposite ways on each side.
Tsuba (Guard): Seigaiha 清海波 Wave, Made in japan from beautifully crafted forged steel.
Saya (Scabbard): White wood covered with skate skin with lacquer. Curved according to the Sori of the blade. The Koi-guchi is made of buffalo horn. Saya with kurikata and 2 shitodome for Obi support. The end of the Saya is made of buffalo horn.
Sageo: Premium Japanese cotton.

1100 gr. without Saya.
1,600 gr. with Saya

Accessories included:
- Embroidered protective cover.
- Supplied in a transport case with a black lacquered support and a maintenance kit.

Possibility of personalizing your saber with laser engraving, contact us by email for this.

----------------------------------------------------------------------------------------

IMPORTANT

CATEGORY D WEAPON - PROHIBITED SALE TO MINORS

Please send us a photocopy of your identity document via the order form that you will receive by email following your purchase or by email: contact@katanas-samurai.com

Pre order Junary

1999.00 €

Rating

No comments Read or write a comment

KingEshop - E-commerce

Katana Unkaï

KingEshop - E-commerce